ACF-MCX is closely based on the AR15/M16 version of the original ACF. Like the factory SIG MCX charging handle, MCX-ACF has two latches.

Design objectives:

1. A stronger, more durable ambidextrous charging handle that can withstand repeated mortaring.

2. A better means of deflecting gas and debris from the shooter's face and eyes when shooting with a sound suppressor.

ACF-MCX design highlights:

1. The width of the T handle is no wider than its SIG counterpart. The sole reason ACF's T handle provides protection to the latches.

2. We retained the gentle rearward sweeping slope of the M16 TDP CH T handle, and avoided a forward cant. A forward cant is more snag prone, we also wanted the users to be able to let go of the latch without having to make a exaggerated motion to get his hand out of the way of the latch. In this, we again followed the original design.

3. ACF-MCX is significantly taller/thicker than the SIG design. Both the front strap and the curved back strap of the ACF are aggressively serrated. The back strap's slight curve follows the curve of the user's thumb. The tall profile of ACF-MCX's T handle is designed to provide more surface area without making the T handle wider, which we deliberately avoided. Wide T handles are levers with mechanical advantage we don't need, they also promote pulling the charging handle back at an angle. Small T handles encourage the user to pull the charging handle straight back, along the bore. Another benefit is the user's fingers are closer to the charging handle's main body. When the user pull the ACF-MCX back, his finger clears the forward assist's rim.

4. A "constant motion" latch on either side of the T handle. The name derives from that the latches don't come to a hard stop prematurely, but will instead continue to move into the ACF-MCX's T handle when mortared. When a user needs to mortar the weapon, no stress is placed on the latches. Though the roll pins we use are immensely strong, the latches and the ACF-MCX body are both aluminum. A design that allows the latch to hit a hard stop, or bottom out, invariably stresses the material around the pin holes. Imagine trying to slam a revolving door, it keeps rolling.

5. A taller and better gas deflection fence. ACF-MCX's fence is taller than the upper receiver, and is horse shoe shaped to conform to the area of the upper where it meets the charging handle.

6. ACF-MCX's T handle is immovable, and fixed in place like the M16 TDP CH design. Like the M16 TDP design, the fixed T handle is strong and has no moving parts.

Machined from 7075 aluminum, ACF is Type III hard coat anodized, and available in black and FDE.

Like all Forward Controls Design products, ACF is proudly designed and made in the USA.
U.S. Patent Nos. 7,900,546 and 7,240,600, under license.