Accessories

Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES or SilencerCo RADIUS laser range finder to ISMS scope mount or spotting scope ring. Includes screws. Height: 35 mm/1.38” Length: 123 mm/4.86” Length: 104 mm/4...

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40...

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 238 g/8.4 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As...

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 261 g/9.2 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Height: 25.4 mm/1”Length: 32 mm/1.26”Weight: 183 g/6.5 ozIncludes the A-0080/81 Leveling Kit

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.0 MIL/0 MOAHeight: 38 mm/1.5”Length: 121 mm/4.76” (mount body only)Weight: 267 g/9.4...

Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 20 mm/0.79” Length: 75 mm/2.95” Weight: 32 g/1.1 oz

Lightweight slim profile aluminum forend for HK G3 and clones. Made from single billet of 7075 T651.Includes one A-0002 Picatinny Rail as well as two set screws to take up any play between the rear of the rail and the receiver and/or barrel shank...

QD ACI Interface for attaching an ACI to the scope mount.  Interface only - ACI not included.Includes screws for attaching to Spuhr interface.

Interface for attaching a Leupold DeltaPoint to the scope mount. Includes screws.The A-0009 footprint also matches the following, though screw head sizing may vary: Firepoint Tasco Optima Trijicon RedDot Some Shield Mini Sight, JPoints, and US Optics...

Spacer for Spuhr interface. Includes screws. Height: 10 mm/.39” Weight: 14 g/0.5 oz

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 268 g/9.5 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.