Accessories

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.0 MIL/MOAHeight: 38 mm/1.5”Length: 150 mm/5...

Extended cantilever long-range mount. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-degree wedge included6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 140...

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws.   The A-0011 footprint also matches the following, though screw head...

Picatinny rail for attaching accessories to our spotting scope rings or handguards.   Height: 8 mm/0.315" Length: 95 mm/3.74" Weight: 28 g/1.0 oz   Screws: Tx20 M4x8 (included)

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 9 mm/.354" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 237 g/8.4 oz10-degree wedge includedNote:

Spuhr SR-3000 - Separate Rings   Ring Size:   30mm Height:  25.4mm(1in) Len

SPUHR SP-3002 - 30mm Picatinny Mount 0MIL/0MOA - 1.5" Ring Size:  30mm Tilt:  0 MIL / 0 MOA Height: 

Spuhr A-0080  10-Degree Key for adjusting the rotation of the scope & test length of screws.Also known as the "wedge". Included with all ISMS mounts.

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS...

Our lowest interface for attaching Wilcox RAPTAR and RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount. Includes screws.Height: 14 mm/.55”Length: 85 mm/3.35” (Picatinny...

Interface for attaching a Gen1 Wilcox RAPTAR-S to ISMS scope mount or spotting scope ring. Features an interrupted rail to compensate for the mold seam on the Gen1 RAPTAR-S (if mounted on a standard...