Mounts

Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to Hunting Series mounts and rings. Includes screws.As the H-series of accessories are designed for our Hunting Series the finish is slightly glossier than that of the A-series versions...

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated...

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.0 MIL/0 MOAHeight: 34 mm/1.35”Length: 121 mm/4.76” (mount body only)Weight: 260 g/9.2...

Picatinny Gen2 Scope Base for Remington 700 Short ActionHigh Quality Dehorned Scope Mount BaseBased on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as...

Interface for mounting single-lever Simrad KN200/250 Image intensifier to a 34 mm mount. For US Simrad dovetails and scopes with a length such as the S&B 3-12 and Steiner 3-15. Includes screws. Height: 24 mm/0.945” (from centerline) Weight:...

Lightweight Top Rail for MP5 and clones. Made from single billet of 7075 T651.Height: 13 mm/0.51” (from top of receiver to top of rail)Length: 125.0 mm/4.92”Weight: 113 g/4 ozNote: Current design includes a a lightening cut so that the serial...

7 MIL/24 MOAHeight: 35 mm/1.38”Clearance: 8.4 mm/.33" (from the bottom of the tube to bridge of the mount body)Length: 121 mm/4.76”Weight: 235 g/8.3 oz10-degree wedge includedNote: For rifles with TRG/Tikka T3x dovetail - NOT for Picatinny...

6 MIL/20.6 MOAHeight: 30 mm/1.18”Clearance: 6 mm/.236" (from the bottom of the tube to bridge of the mount body)Length: 128 mm/5.04”Weight: 247 g/8.7 oz10-degree wedge includedNote: Will not fit the Hensoldt ZF 3.5-26x56Note: Will not fit the...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.0 MIL/MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 260 g/9.2 oz10-degree wedge...

Extended cantilever long-range mount. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-degree wedge included6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 140 mm/5.51”Weight: TBDNote: Will not fit...

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws.   The A-0011 footprint also matches the following, though screw head sizing may vary: Docter/Noblex Sight C / Sight 2+...