OPTIC ACCESSORIES

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.0 MIL/MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 260 g/9.2 oz10-degree wedge...

Extended cantilever long-range mount. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-degree wedge included6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 140 mm/5.51”Weight: TBDNote: Will not fit...

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 9 mm/.354" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 237 g/8.4 oz10-degree wedge includedNote: As of 2019 this mount is delivered with five clamping screws...

SPUHR SP-3002 - 30mm Picatinny Mount 0MIL/0MOA - 1.5" Ring Size:  30mm Tilt:  0 MIL / 0 MOA Height:  38mm(1.5in) Length:  126mm(4.96in)   Durability Prevents damage on scope due to flexing during heavy recoil or rough...

The SP-6002 went through a re-design during 2020. The updated design has been shortened 11 mm and the mount body was fitted with an integrated bubble level. Gen1 & Gen2 versions use the A-0072 side clamp, whereas the current design use the A-0065...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 255 g/9.0 oz10-degree...

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.Height: 38 mm/1.5”Length: 121 mm/4.76” (mount body only)Weight: 267 g/9.4 oz10-degree wedge...

6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 128 mm/5.04”Weight: 273 g/9.6 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40...

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 238 g/8.4 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As...

Durability Prevents damage on scope due to flexing during heavy recoil or rough environment. The snipers rifle and the spotters carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better...

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 261 g/9.2 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.