Scope Accessories

The SP-6002 went through a re-design during 2020. The updated design has been shortened 11 mm and the mount body was fitted with an integrated bubble level. Gen1 & Gen2 versions use the A-0072 side clamp, whereas the current design use the A-0065...

Lightweight Top Rail for G3 and clones. Uses a unique cummerbund design to ensure that the front of the rail remains secure and movement free. Made from single billet of 7075 T651.Height: 13 mm/0.51” (from top of receiver to top of rail)Length: 245...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 255 g/9.0 oz10-degree...

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.Height: 38 mm/1.5”Length: 121 mm/4.76” (mount body only)Weight: 267 g/9.4 oz10-degree wedge...

6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 128 mm/5.04”Weight: 273 g/9.6 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Picatinny rail for attaching accessories to our forends (1 pcs included with all forends). Height: 8 mm/0.315" Length: 55 mm/2.16" Weight: 15 g/0.5 oz Screws: Tx20 M4x8 (included) Note: Not for use on ISMS or Hunting Series mounts.

Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES or SilencerCo RADIUS laser range finder to ISMS scope mount or spotting scope ring. Includes screws. Height: 35 mm/1.38” Length: 123 mm/4.86” Length: 104 mm/4...

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40...

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 238 g/8.4 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As...

Durability Prevents damage on scope due to flexing during heavy recoil or rough environment. The snipers rifle and the spotters carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better...

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 261 g/9.2 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Height: 25.4 mm/1”Length: 32 mm/1.26”Weight: 183 g/6.5 ozIncludes the A-0080/81 Leveling Kit