Spuhr

Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 20 mm/0.79” Length: 75 mm/2.95” Weight: 32 g/1.1 oz

Lightweight slim profile aluminum forend for HK G3 and clones. Made from single billet of 7075 T651.Includes one A-0002 Picatinny Rail as well as two set screws to take up any play between the rear of the rail and the receiver and/or barrel shank...

QD ACI Interface for attaching an ACI to the scope mount.  Interface only - ACI not included.Includes screws for attaching to Spuhr interface.

Interface for attaching a Leupold DeltaPoint to the scope mount. Includes screws.The A-0009 footprint also matches the following, though screw head sizing may vary: Firepoint Tasco Optima Trijicon RedDot Some Shield Mini Sight, JPoints, and US Optics...

Spacer for Spuhr interface. Includes screws. Height: 10 mm/.39” Weight: 14 g/0.5 oz

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 268 g/9.5 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Spacer for Spuhr Interface. Height: 4 mm/.157” Weight: 7 g/0.2 oz Includes screws.

Interface for attaching Sniper Tools and Nightforce Angle Cosine and Angle Degree Indicators to ISMS scope mount or rings. The ACI is held in place against the A-0023 by two M3 Torx 10 screws, requiring the ACI to be attached or removed using a Torx 10...

Picatinny interface for attaching 3rd party accessories with Picatinny clamps to the ISMS scope mount. Includes screws. Height: 14 mm/0.55” Length: 75 mm/2.95” Weight: 31 g/1.1 oz

Leveling kit for indexing the reticle to the Picatinny Rail. Included with SR-series of rings. Cannot be used with Weaver rails, ISMS unimounts or ISMS cantilever mounts. Included with all SR-series rings. Note: Minimum clearance 3 mm (0.118")

Picatinny Rail for Spuhr interface. Includes screws. Height: 10 mm/0.39” Length: 55 mm/2.16” Weight: 18 g/0.6 oz

Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws. The A-0010 footprint also matches the following, though screw sizing may vary: Trijicon RMR Trijicon SRO Holosun HS407C Holosun...