Accessories

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS...

Our lowest interface for attaching Wilcox RAPTAR and RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount. Includes screws.Height: 14 mm/.55”Length: 85 mm/3.35” (Picatinny...

Interface for attaching a Gen1 Wilcox RAPTAR-S to ISMS scope mount or spotting scope ring. Features an interrupted rail to compensate for the mold seam on the Gen1 RAPTAR-S (if mounted on a standard...

Lightweight Top Rail for G3 and clones. Uses a unique cummerbund design to ensure that the front of the rail remains secure and movement free. Made from single billet of 7075 T651.Height: 13 mm/0.51”...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 150 mm/5...

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.Height: 38 mm/1.5”Length: 121 mm/4.76” (mount body...

Picatinny rail for attaching accessories to our forends (1 pcs included with all forends). Height: 8 mm/0.315" Length: 55 mm/2.16" Weight: 15 g/0.5 oz Screws: Tx20 M4x8 (included) Note: Not for...

Interface for attaching Wilcox RAPTAR, RAPTAR-S (Gen2,) RAPTAR Lite ES or SilencerCo RADIUS laser range finder to ISMS scope mount or spotting scope ring. Includes screws. Height: 35 mm/1.38”...

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV...

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 6.5 mm/.255" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 238 g/8.4 oz10-degree wedge includedNote: Will not fit...

6 MIL/20,6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 261 g/9.2 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no...