Accessories

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

6 MIL/20,6 MOAHeight: 30 mm/1.18”Clearance: 9 mm/.354" (from the bottom of the tube to bridge of the mount body)Length: 126 mm/4.96”Weight: 237 g/8.4 oz10-degree wedge includedNote: As of 2019 this mount is delivered with five clamping screws...

Spuhr SR-3000 - Separate Rings   Ring Size:   30mm Height:  25.4mm(1in) Length:  32mm(1.26in)   Durability Prevents damage on scope due to flexing during heavy recoil or rough environment. The sniper’s rifle...

Spuhr A-0080  10-Degree Key for adjusting the rotation of the scope & test length of screws.Also known as the "wedge". Included with all ISMS mounts.

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS.Weight: 20 g/0.7 oz

Our lowest interface for attaching Wilcox RAPTAR and RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount. Includes screws.Height: 14 mm/.55”Length: 85 mm/3.35” (Picatinny Rail)Weight: 31 g/1.1 ozNote: The A-0019D is not...

Interface for attaching a Gen1 Wilcox RAPTAR-S to ISMS scope mount or spotting scope ring. Features an interrupted rail to compensate for the mold seam on the Gen1 RAPTAR-S (if mounted on a standard uninterrupted Picatinny rail the Gen1 RAPTAR-S will...

Lightweight Top Rail for G3 and clones. Uses a unique cummerbund design to ensure that the front of the rail remains secure and movement free. Made from single billet of 7075 T651.Height: 13 mm/0.51” (from top of receiver to top of rail)Length: 245...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 255 g/9.0 oz10-degree...

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.Height: 38 mm/1.5”Length: 121 mm/4.76” (mount body only)Weight: 267 g/9.4 oz10-degree wedge...

6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 128 mm/5.04”Weight: 273 g/9.6 oz10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.

Picatinny rail for attaching accessories to our forends (1 pcs included with all forends). Height: 8 mm/0.315" Length: 55 mm/2.16" Weight: 15 g/0.5 oz Screws: Tx20 M4x8 (included) Note: Not for use on ISMS or Hunting Series mounts.