Accessories

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.0 MIL/0 MOAHeight: 34 mm/1.35”Length: 121 mm/4.76” (mount body only)Weight: 260 g/9.2...

Picatinny Gen2 Scope Base for Remington 700 Short ActionHigh Quality Dehorned Scope Mount BaseBased on a decade of experience designing and manufacturing the original Ideal Scope Mount System – including a vast number of accessories – as...

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever...

Interface for mounting single-lever Simrad KN200/250 Image intensifier to a 34 mm mount. For US Simrad dovetails and scopes with a length such as the S&B 3-12 and Steiner 3-15. Includes screws. Height: 24 mm/0.945” (from centerline) Weight:...

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40...

7 MIL/24 MOAHeight: 35 mm/1.38”Clearance: 8.4 mm/.33" (from the bottom of the tube to bridge of the mount body)Length: 121 mm/4.76”Weight: 235 g/8.3 oz10-degree wedge includedNote: For rifles with TRG/Tikka T3x dovetail - NOT for Picatinny...

6 MIL/20.6 MOAHeight: 30 mm/1.18”Clearance: 6 mm/.236" (from the bottom of the tube to bridge of the mount body)Length: 128 mm/5.04”Weight: 247 g/8.7 oz10-degree wedge includedNote: Will not fit the Hensoldt ZF 3.5-26x56Note: Will not fit the...

The worlds most rugged Aimpoint Micro/CompM5 mount.Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Absolute Co-witnessHeight: 38 mm/1.5" (with Aimpoint Micro T-1)Height from rail to footprint: 21.8 mm/0.86"Weight: 90...

Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount.0 MIL/MOAHeight: 38 mm/1.5”Length: 150 mm/5.9”Weight: 260 g/9.2 oz10-degree wedge...

Extended cantilever long-range mount. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.10-degree wedge included6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 140 mm/5.51”Weight: TBDNote: Will not fit...

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws.   The A-0011 footprint also matches the following, though screw head sizing may vary: Docter/Noblex Sight C / Sight 2+...

Picatinny rail for attaching accessories to our spotting scope rings or handguards.   Height: 8 mm/0.315" Length: 95 mm/3.74" Weight: 28 g/1.0 oz   Screws: Tx20 M4x8 (included)